Dellorto Shop - Carburettor Shop - Ricambi Carburatori - Carburettor Spare Parts Jets and Service Kits


Find www.DellortoShop.com on FaceBook

Dellorto,  Weber, Solex, Edelbrock carburettors jets chokes parts and service kits& Dellorto,  Weber, Solex, Edelbrock carburettors jets chokes parts and service kits

More than 13.000 carburetor parts in stock, ready to ship!
DellortoShop.com, RicambiCarburatori.com and CarburettorShop.com are privately owned and operated websites.
We have no affiliation with Dellorto SpA.

NEW ARRIVAL:
Rebuild kit for Fispa Fuel Pressure Regulator Kit WITHOUT Pin
Rebuild kit for Fispa Fuel Pressure Regulator Kit WITHOUT Pin
Rebuild kit for Fispa Fuel Pressure Regulator Kit WITHOUT Pin

Feel free to visit our sister websites:
www.ClassicJack.com www.TheF1Store.com www.MaranelloMerchandise.com www.RaceWinkel.nl www.RossiMerchandise.com www.MotoMerchandiseShop.com www.Macora.com www.ExperienceLeMans.com www.Zagato-Cars.com www.RalphSchumacher.com www.FerrariStuff.com www.PiccoloWorld.com www.GeoHam.com www.Valentino-Rossi-Shop.com www.Valentino-Rossi-Shop.nl www.HouseOfTheTrident.com www.DellortoShop.com www.CarburateurWinkel.nl www.MaranelloLiterature.com www.CarburettorShop.com www.GunsonWinkel.nl www.GunsonShop.com www.TinToyShop.com www.RicambiCarburatori.com www.CarburetorCity.com www.CarburateurWinkel.be

Dellorto Shop - CarburettorShop - RicambiCarburatori - Carburettor Spare Parts Jets and Service Kits

!
AS1FU202
Rebuild kit for Fispa Fuel Pressure Regulator Kit WITH Pin

Rebuild kit for Fispa Fuel Pressure Regulator Kit WITH Pin

Newly arrived Rebuild kit for Fispa Fuel Pressure Regulator Kit WITH Pin

This is a complete overhaul kit for the Fispa Fuel Pressure Regulator.

Please note that Fispa has produced at least two different versions over the years:

  1. The version WITHOUT a pin on the center of the diaphragm
  2. This version here WITH a pin on the center of the diaphragm

The difference between the two will be clear from this picture:
Rebuild kit for Fispa Fuel Pressure Regulator Kit WITH Pin

There are more differences than just the pin but the pin is the best indicator for which kit you need.

The set with the diaphragm WITHOUT pin can be found HERE.

Officially, this set suits both the Fispa FB43 and FRB11 fuel filters with build-in pressure regulator.

The bolt pattern is as follows: circa 33 mm heart-to-heart and about 42 mm across (diagonally).

This set is E10- and bio-fuel resistant.

Rebuild kit for Fispa Fuel Pressure Regulator Kit WITH Pin

AS1FU205
Rebuild kit for Fispa Fuel Pressure Regulator Kit WITHOUT Pin

Rebuild kit for Fispa Fuel Pressure Regulator Kit WITHOUT Pin

Newly arrived Rebuild kit for Fispa Fuel Pressure Regulator Kit WITHOUT Pin

This is a complete overhaul kit for the Fispa Fuel Pressure Regulator.

Please note that Fispa has produced at least two different versions over the years:

  1. The version WITH a pin on the center of the diaphragm
  2. This version here WITHOUT a pin on the center of the diaphragm

The difference between the two will be clear from this picture:
Rebuild kit for Fispa Fuel Pressure Regulator Kit WITOUT Pin

There are more differences than just the pin but the pin is the best indicator for which kit you need.

The set with the diaphragm WITH pin can be found HERE.

Officially, this set suits both the Fispa FB43 and FRB11 fuel filters with build-in pressure regulator.

The bolt pattern is as follows: circa 33 mm heart-to-heart and about 42 mm across (diagonally).

This set is E10- and bio-fuel resistant.

Rebuild kit for Fispa Fuel Pressure Regulator Kit WITHOUT Pin

KSKH1192NAPLUS
Elaborate Service kit with Air Cut-Off Valve for Keihin Carburetors on Honda XL500 S

Elaborate Service kit with Air Cut-Off Valve for Keihin Carburetors on Honda XL500 S

Newly arrived Elaborate Service kit with Air Cut-Off Valve for Keihin Carburetors on Honda XL500 S

Service Kit for the Keihin carburetors as used on the 1979 - 1981 Honda XL500 S motorcycles.

On top of our "regular" rebuild set, this service kit also contains a replacement for the fragile air cut-off valve.

In total, this service kit contains, amongst others, the following parts to service 1 carburettor:

  • Air Cut-Off Valve Overhaul Kit (Diaphragm, spring & o-ring)
  • Float Bowl Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Top Cover Gasket
  • Needle 65A
  • Needle Clip
  • Needle Jet
  • Main jet, size 155
  • Various Viton (rubber) o-rings and washers as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Honda XL 500, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City service kit of outstanding Japanese manufacture.

Elaborate Service kit with Air Cut-Off Valve for Keihin Carburetors on Honda XL500 S

KSKH1192NA
Elaborate Service kit for Keihin Carburetors on Honda XL500 S

Elaborate Service kit for Keihin Carburetors on Honda XL500 S

Newly arrived Elaborate Service kit for Keihin Carburetors on Honda XL500 S

Service Kit for the Keihin carburetors as used on the 1979 - 1981 Honda XL500 S motorcycles.

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Top Cover Gasket
  • Needle 65A
  • Needle Clip
  • Needle Jet
  • Main jet, size 155
  • Various Viton (rubber) o-rings and washers as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Honda XL 500, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City service kit of outstanding Japanese manufacture.

Elaborate Service kit for Keihin Carburetors on Honda XL500 S

16621
(18) Lever-Type Choke Mechanism for Dellorto VHST carburetors

(18) Lever-Type Choke Mechanism for Dellorto VHST carburetors

Newly arrived Lever-Type Choke Mechanism for Dellorto VHST carburetors

Lever-Type Choke Mechanisme for Dellorto VHST carburetors.

Required quantity per carburettor: 1

This is item number 18 in the drawing.

 

 

 

(18) Lever-Type Choke Mechanism for Dellorto VHST carburetors

53142
1 - Cable Choke Kit for Dellorto VHST carburetors

1 - Cable Choke Kit for Dellorto VHST carburetors

Newly arrived Cable Choke Kit for Dellorto VHST carburetors

Cable Choke Kit for Dellorto VHST carburetors.

This kit contains all the parts that are shown in the photograph.

Please note that this kit is for cable-operated chokes.

Required quantity per carburettor: 1

 

1 - Cable Choke Kit for Dellorto VHST carburetors

53141
2 - Cable Choke Kit for Dellorto VHST carburetors

2 - Cable Choke Kit for Dellorto VHST carburetors

Newly arrived Cable Choke Kit for Dellorto VHST carburetors

Cable Choke Kit for Dellorto VHST carburetors.

This kit contains all the parts that are shown in the photograph.

Please note that this kit is for cable-operated chokes.

Required quantity per carburettor: 1

 

2 - Cable Choke Kit for Dellorto VHST carburetors

53120
(16) Lever Choke Kit for Dellorto VHST carburetors

(16) Lever Choke Kit for Dellorto VHST carburetors

Newly arrived Lever Choke Kit for Dellorto VHST carburetors

Lever Choke Kit for Dellorto VHST carburetors.

This kit contains all the parts that are shown in the photograph.

Please note that this lever hinges on a pin in the carburetor body.
This pin is NOT included.
If your carburettor is not equipped with this pin, then this is not the correct set for it.

Required quantity per carburettor: 1

This is item number 16 in the drawing.

(16) Lever Choke Kit for Dellorto VHST carburetors

64005.103
(39) Butterfly Valve for Weber IDF 44 carburetors

(39) Butterfly Valve for Weber IDF 44 carburetors

Newly arrived Butterfly Valve for Weber IDF 44 carburetors

This is a butterfly valve for the 44mm Weber IDF carburetors.

The center-to-center distance between the fixing holes is 16 mm.

Required quantity per carburettor: 2

This is item number 39 in the drawing.

If you are replacing butterfly valves, please ALWAYS use new screws!

The Weber IDF uses screws S57392022

For your convenience, you can order new screws right along with your butterfly valve by simply selecting them through the drop box.

(39) Butterfly Valve for Weber IDF 44 carburetors

CCR0883
Service Kit for the Solex 40 DDHT carburetors for Volkwagen K70

Service Kit for the Solex 40 DDHT carburetors for Volkwagen K70

Newly arrived Service Kit for the Solex 40 DDHT carburetors for Volkwagen K70

Service kit for the Solex 40 DDFT carburetors as used on the Volkswagen K70.

This rebuild kit contains, amongst others, the following parts to service 1 carburettor, as depicted in the photograph:

  • Elaborate gasket kit
  • Pump diaphragm
  • Needle valve
  • Various washers and o-rings
  • Throttle return spring
  • Throttle Shaft Bushings
  • 2 Throttle valves
  • 4 Throttle valve screws

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for the Solex 40 DDHT carburetors for Volkwagen K70

PM20912
(5) Needle Valve for Weber 3-Barrel carburetors - IDA - IDAP - IDL - IDPT - IDS - IDT - IF

(5) Needle Valve for Weber 3-Barrel carburetors - IDA - IDAP - IDL - IDPT - IDS - IDT - IF

Newly arrived Needle Valve for Weber 3-Barrel carburetors - IDA - IDAP - IDL - IDPT - IDS - IDT - IF

Needle valve for the 3-barrel versions of the following models of Weber carburetors:

  • Weber 40 IDA
  • Weber 46 IDA
  • Weber 40 IDAP
  • Weber 40 IDL
  • Weber 40 IDPT
  • Weber 40 IDS
  • Weber 40 IDT
  • Weber 40 IF

Only available in size 175.

Required quantity per carburettor: 2

This is item number 5 in the drawing.

(5) Needle Valve for Weber 3-Barrel carburetors - IDA - IDAP - IDL - IDPT - IDS - IDT - IF

CCR6436
Service Kit for 1 x Solex 42 DDHF carburetors for Lancia Fulvia

Service Kit for 1 x Solex 42 DDHF carburetors for Lancia Fulvia

Newly arrived Service Kit for 1 x Solex 42 DDHF carburetors for Lancia Fulvia

Service kit for the Solex 42 DDHF carburetors as used on the Lancia Fulvia.

This rebuild kit contains, amongst others, the following parts to service 1 carburettor, as depicted in the photograph:

  • Elaborate gasket kit
  • Pump diaphragm
  • Needle valves
  • Various washers and o-rings
  • Throttle return spring
  • 2 Throttle valves
  • 4 Brass throttle valve screws

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for 1 x Solex 42 DDHF carburetors for Lancia Fulvia

CARTERW4259
Carter 6 Volt Low-Pressure Fuel Pump - Dual Polarity

Carter 6 Volt Low-Pressure Fuel Pump - Dual Polarity

Newly arrived Carter 6 Volt Low-Pressure Fuel Pump - Dual Polarity

This is a special fuel pump for vehicles with a 6 Volt electrical system.

What makes this pump extra special is the fact that it is a Dual-Polarity pump. In other words: it is both suitable for vehicles with a Negative Earth as well as vehicles with a Positive Earth.

Despite being a 6 Volt pump, the output is an incredible 72 Gallons per Hour or 270 Liters!

Thanks to its low output pressure of 5.75 PSI / 0.4 Bar, it usually does not require a pressure regulator but please check your system requirements to make sure.

In case you still need to reduce the pressure, our Pressure Regulators can be found HERE.

Pump specification:

  • Flow rate: 72 Gallons/hour - 270 liters/hour
  • Pressure: 5.75 PSI / 0.4 Bar
  • Pipe union thread size: 1/4" NPT tapered thread
  • Power supply: 6 Volt Negative Earth AND 6 Volt Positive Earth
  • Suitable for nearly all fuels, including modern ones, but NOT suited for Methanol or Diesel

The kit includes:

  • Pump
  • Mounting bracket and materials
  • 10 mm inlet and outlet unions with spring-type hose clips

Couplings Specifications:
Connection to pump body: 1/4" NPT tapered thread
Fuel Unions for fuel lines with 10 mm internal diameter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.

As an alternative, you can use our Loctite 542 Thread Sealant which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

Carter 6 Volt Low-Pressure Fuel Pump - Dual Polarity

52621
(33) Service Kit for Dellorto PHVB carburetors

(33) Service Kit for Dellorto PHVB carburetors

Newly arrived Service Kit for Dellorto PHVB carburetors

Factory original service kit for the Dellorto PHVB carburetors.

Contains an assortment of molded rubber (Viton) gaskets, O-Rings and washers to service 1 carburetor.

Required quantity per carburettor: 1

This is item number 33 in the drawing.

 

 

(33) Service Kit for Dellorto PHVB carburetors

14371
(1) Throttle Slide for Dellorto PHVB carburetors

(1) Throttle Slide for Dellorto PHVB carburetors

Newly arrived Throttle Slide for Dellorto PHVB carburetors

Throttle Slide for the Dellorto PHVB series carburetors.

These are original Dellorto slides, marked with the famous diamond-shaped "Inc" logo.

Available in versions:

  • 40
  • 60

Please note that Dellorto has stopped the production of these slides several years ago.
For this reason, the existing stocks are getting slowly depleted.
So: available as long as our stock lasts!

Required quantity per carburetor: 1

This is item number 1 in the drawing.

(1) Throttle Slide for Dellorto PHVB carburetors

CDUS175
Rebuild Kit for Stromberg 175 CDUS carburetors for Volvo 240 2.3 GL

Rebuild Kit for Stromberg 175 CDUS carburetors for Volvo 240 2.3 GL

Newly arrived Rebuild Kit for Stromberg 175 CDUS carburetors for Volvo 240 2.3 GL

Service kit for the Stromberg 175 CDUS carburetor as fitted to, amongst others, the:

  • Volvo 240 2.3GL

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Pump Diaphragm
  • Gasket Set
  • Needle Valve assembly; size 225
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CDUS carburetors for Volvo 240 2.3 GL

7341
(39) Choke actuating lever for Dellorto DHLA carburetors

(39) Choke actuating lever for Dellorto DHLA carburetors

Newly arrived Choke actuating lever for Dellorto DHLA carburetors

Reconditioned and Replated choke actuating lever for Dellorto DHLA carburetors.

Please note that Dellorto has stopped the production of these levers and consequently this is a used item that has been reconditioned and then nickel-plated.

Required quantity per carburetor: 1

This is item number 39 in the drawing.

 

(39) Choke actuating lever for Dellorto DHLA carburetors

50DCO/SP-NOS
New-Old-Stock set of 2 x Weber 50 DCO/SP Carburetors for Opel 2400 Rallye

New-Old-Stock set of 2 x Weber 50 DCO/SP Carburetors for Opel 2400 Rallye

Newly arrived New-Old-Stock set of 2 x Weber 50 DCO/SP Carburetors for Opel 2400 Rallye

New-Old-Stock set consisting of 2 x Weber 50 DCO/SP carburettors for Opel 2400 Rallye.

This is what we consider, already, our find of he year!

This is an authentic, unused, set of 2 Weber 50 DCO/SP carburettors, especially made for use on the Opel 2400 Rally engines but will fit of course all engines and manifolds that can accommodate 50 mm carburetors.

Produced around 1980 in Bologna, Italy, this is THE Must-Have for the Opel- freak!

Please note that Weber still has 50DCP/Sp's produced in Spain nowadays but that this concerns and authentic, matched (!) Italian set.

Apart from a slight quality advantage compared to the Spanish production items, the most important is that these carbs are period-correct for creating or restoring one of Opel's Rally Beasts.

In Factory Rally Trim, these 2400 engines boasted, reputedly, over 350 HP with Maestro's like Walter Röhrl at the wheel.

This particular version, 50DCO1/SP 8D, has 4 progressionholes.

As this is the DCO/SP version (Doppio Corpo Orizontale / SPort or Twin Barrel Horizontal Sports) these carburettors do NOT have any form of Cold-Start Device (or choke) fitted.

The set will be supplied as depicted, each carburetor in its original box.

Accessories and virtually all jets and tuning parts for these DCO/SP's can be found HERE.

They are supplied with the following jetting recipe:

  • 46 mm choke / venturi (no other sizes available)
  • 180 Main Jet
  • 65F8 Idle Jet
  • F7 Main Emulsion Tube
  • 45 Pump Jet
  • 100 Back Bleed Valve
  • 250 Needle Valve

The trumpets measure 42.5 mm in length.

Only 1 set available!

New-Old-Stock set of 2 x Weber 50 DCO/SP Carburetors for Opel 2400 Rallye

VM8635
Service Kit for Pierburg 36 1B2 carburetors for BMW 315

Service Kit for Pierburg 36 1B2 carburetors for BMW 315

Newly arrived Service Kit for Pierburg 36 1B2 carburetors for BMW 315

Service kit for the Pierburg 36 1B2 carburetor as used on the BMW 315.

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets as per the photograph
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • TN-diaphragm
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B2 carburetors for BMW 315

45034.044
(98) Left Hand Ball Lever for a single Weber DCOE and DCO/SP carburetor

(98) Left Hand Ball Lever for a single Weber DCOE and DCO/SP carburetor

Newly arrived Left Hand Ball Lever for a single Weber DCOE and DCO/SP carburetor

Left Hand Ball Lever for a single Weber DCOE and DCO/SP carburetor.

This lever is intended to be mounted on the LEFT hand side of either DCOE or DCO/SP carburetor.
To avoid confusion: that is seen from the airfilter side of the carburetor.

It has no provisions for a balance lever as it is intended for a single carburettor.

Required quantity per carburetor: 1

This is item number 98 in the drawing.

(98) Left Hand Ball Lever for a single Weber DCOE and DCO/SP carburetor

76210
(12) Pump Jet for Spanish Weber IDF carburetors

(12) Pump Jet for Spanish Weber IDF carburetors

Newly arrived Pump Jet for Spanish Weber IDF carburetors

Pump Jet for Spanish Weber IDF carburetors.

Available from stock in sizes:

  • 35 (Limited availability!)
  • 40
  • 45
  • 50

Other sizes might be available on request.

Required quantity per carburettor: 2

This is item number 12 in the drawing.

(12) Pump Jet for Spanish Weber IDF carburetors

44PHN
Service Kit for Solex 44 PHN carburetors for Volvo Penta Marine

Service Kit for Solex 44 PHN carburetors for Volvo Penta Marine

Newly arrived Service Kit for Solex 44 PHN carburetors for Volvo Penta Marine

Service kit for the Solex 44 PHN carburetor as used on, amongst others, Volvo Penta Marine Engines:

  • AQ120B
  • AQ140A
  • BB140A

Contains the parts to service 1 carburettor.

Consists of the following parts:

  • Various gaskets
  • Pump diaphragm
  • Needle Valve
  • Various copper washers
  • Various aluminum washers

For the exact contents, please see the photograph.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 44 PHN carburetors for Volvo Penta Marine

WC99004.300
Carburetor Adapter Plate Kit for Hitachi carburetors on Nissan and Datsun engines

Carburetor Adapter Plate Kit for Hitachi carburetors on Nissan and Datsun engines

Newly arrived Carburetor Adapter Plate Kit for Hitachi carburetors on Nissan and Datsun engines

Adapter Plate Kit for the Datsun and Nissan L16, L18 and L20B engine series.

It allows to replace the aging and wearing Hitachi carburetor with a brand new Weber DGC, DGAV or DGEV carburetor (NOT included!).

It converts the bolt pattern to 80 x 44 mm to accommodate the above mentioned Webers.

We can also supply you with a suitable Weber carburettor or a complete conversion kit.
Please contact us with your exact needs.

Carburetor Adapter Plate Kit for Hitachi carburetors on Nissan and Datsun engines

14760
(1) Throttle Slide "Chrome" for Dellorto VHSB34QD carburetors for Rotax Max engines

(1) Throttle Slide "Chrome" for Dellorto VHSB34QD carburetors for Rotax Max engines

Newly arrived Throttle Slide "Chrome" for Dellorto VHSB34QD carburetors for Rotax Max engines

Throttle Slide "Chrome" for Dellorto VHSB34QD carburetors for Rotax Max engines.

This is the heavier, round topped, slide.

Available in versions:

  • 40
  • 45

Required quantity per carburettor: 1

This is item number 1 in the drawing.

(1) Throttle Slide "Chrome" for Dellorto VHSB34QD carburetors for Rotax Max engines

14760
(4) Throttle Slide "Chrome" for Dellorto VHSB carburetors

(4) Throttle Slide "Chrome" for Dellorto VHSB carburetors

Newly arrived Throttle Slide "Chrome" for Dellorto VHSB carburetors

Throttle Slide "Chrome" for Dellorto VHSB carburetors.

This is the heavier, round topped, slide.

Available in versions:

  • 40
  • 45

Required quantity per carburettor: 1

This is item number 1 in the drawing.

(4) Throttle Slide "Chrome" for Dellorto VHSB carburetors