Mikuni BDST carburetor parts
Mikuni BDST carburetor parts

Mikuni BDST Parts

Mikuni BDST carburetor parts.

On this page you will find all currently available parts for the Mikuni BDST range carburetors.

We are still very much expanding our parts offerings for these carburettors so please contact us by email if the part that you are looking for is not yet listed.

Our Contact Page can be found HERE.

Mikuni BDST carburetor parts

!
Mikuni BDST Jets

Mikuni BDST Jets

Mikuni BDST Jets.

The variety of Mikuni jets is really overwhelming and as the icing on the cake, there's no telling which yet was used on which motorcycle and when...

For this reason, we have decided to create one single page with all the Mikuni motorcycle jets that we can supply.

On that page you will find the exact dimensions of those jets so that you can easily compare them to the one(s) that you found in your carburetor.

The Mikuni Motorcycle Jets page can be found HERE.

Mikuni BDST Jets

KSK688
Service Kit for Mikuni BDST carburetors for Cagiva Elefant 750 and 900

Service Kit for Mikuni BDST carburetors for Cagiva Elefant 750 and 900

Service Kit for Mikuni BDST carburetors as used on the Cagiva Elefant 750 & 900.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Cagiva Elefant 750 and 900

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 400 SS SuperSport

Service Kit for Mikuni BDST carburetors for Ducati 400 SS SuperSport

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 400 SS SuperSport.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 400 SS SuperSport

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 400 Monster

Service Kit for Mikuni BDST carburetors for Ducati 400 Monster

Service Kit for Mikuni BDST carburetors as used on , amongst others, the Ducati 400 Monster.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 400 Monster

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 600 SS

Service Kit for Mikuni BDST carburetors for Ducati 600 SS

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 600 SS SuperSport.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 600 SS

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 600 Monster

Service Kit for Mikuni BDST carburetors for Ducati 600 Monster

Service Kit for Mikuni BDST carburetors as used on , amongst others, the Ducati 600 Monster.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 600 Monster

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 750 SS

Service Kit for Mikuni BDST carburetors for Ducati 750 SS

Service Kit for Mikuni BDST carburetors as used on , amongst others, the Ducati 750 SS SuperSport (1991 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 750 SS

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 750 Monster

Service Kit for Mikuni BDST carburetors for Ducati 750 Monster

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 750 Monster (1991 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 750 Monster

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 900 SS

Service Kit for Mikuni BDST carburetors for Ducati 900 SS

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 900 SS SuperSport (1991 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 900 SS

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 900 Monster

Service Kit for Mikuni BDST carburetors for Ducati 900 Monster

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 900 Monster (1993 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit of outstanding Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Ducati 900 Monster

KSK1484
Service kit for Mikuni Carburetors on Suzuki GSF400 Bandit

Service kit for Mikuni Carburetors on Suzuki GSF400 Bandit

Service Kit for the Mikuni carburetors as used on the 1991 - 1993 Suzuki GSF400 Bandit.

This service kit contains the following parts to service 4 carburettors:

  • 4 x Float Bowl Gasket
  • 4 x Needle Valve

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Service kit for Mikuni Carburetors on Suzuki GSF400 Bandit

KSK688
Service Kit for Mikuni BDST carburetors for Yamaha FZR1000 Exup

Service Kit for Mikuni BDST carburetors for Yamaha FZR1000 Exup

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha FZR1000 Exup.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Yamaha FZR1000 Exup

KSK688
Service Kit for Mikuni BDST carburetors for Yamaha TDM 850

Service Kit for Mikuni BDST carburetors for Yamaha TDM 850

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha TDM 850.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture..

Service Kit for Mikuni BDST carburetors for Yamaha TDM 850

KSK688
Service Kit for Mikuni BDST carburetors for Yamaha TRX 850

Service Kit for Mikuni BDST carburetors for Yamaha TRX 850

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha TRX 850.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture..

Service Kit for Mikuni BDST carburetors for Yamaha TRX 850

KSK688
Service Kit for Mikuni BDST carburetors for Yamaha XTZ 750

Service Kit for Mikuni BDST carburetors for Yamaha XTZ 750

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha XTZ 750.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Yamaha XTZ 750

KSK688
Service Kit for Mikuni BDST carburetors for Yamaha YZF750R

Service Kit for Mikuni BDST carburetors for Yamaha YZF750R

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha YZF 750 R.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City rebuild kit of superb Japanese manufacture.

Service Kit for Mikuni BDST carburetors for Yamaha YZF750R

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Cagiva Elefant 750 and 900

Complete Throttle Slide for Mikuni BDST 38 carburetors for Cagiva Elefant 750 and 900

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Cagiva Elefant 750 and Elefant 900.

Mikuni part number: N213109
Cagivca part number: 13440011A

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Cagiva Elefant 750 and 900

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Cagiva Elefant

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Cagiva Elefant

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Cagiva Elefant 750 and 900.

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply a complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Cagiva Elefant

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 400 SS SuperSport

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 400 SS SuperSport

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 400 SS SuperSport.

Mikuni part number: N213109
Ducati part number: 13440011A

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 400 SS SuperSport

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 400 SS SuperSport

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 400 SS SuperSport

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 400 SS SuperSport.

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 400 SS SuperSport

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 400 Monster

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 400 Monster

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 400 Monster.

Mikuni part number: N213109
Ducati part number: 13440011A

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 400 Monster

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 400 Monster

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 400 Monster

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 400 Monster.

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 400 Monster

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 600 SS SuperSport

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 600 SS SuperSport

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 600 SS SuperSport.

Mikuni part number: N213109
Ducati part number: 13440011A

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 600 SS SuperSport

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 600 SS

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 600 SS

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 600 SS SuperSport (1994-2000).

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 600 SS

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 600 Monster

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 600 Monster

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 600 Monster.

Mikuni part number: N213109
Ducati part number: 13440011A

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 600 Monster

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 600 Monster

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 600 Monster

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 600 Monster.

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 600 Monster

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 750 SS SuperSport

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 750 SS SuperSport

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 750 SS SuperSport.

Mikuni part number: N213109
Ducati part number: 13440011A

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 750 SS SuperSport

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 750 SS

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 750 SS

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 750 SS SuperSport (1991 - 1998).

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 750 SS

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 750 Monster

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 750 Monster

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 750 Monster.

Mikuni part number: N213109
Ducati part number: 13440011A

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 750 Monster

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 750 Monster

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 750 Monster

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 750 Monster (1991 - 1998).

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 750 Monster

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 900 SS SuperSport

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 900 SS SuperSport

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 900 SuperSport.

Mikuni part number: N213109
Ducati part number: 13440011A

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 900 SS SuperSport

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 900 SS

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 900 SS

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 900 SS SuperSport (1991 - 1998).

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 900 SS

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 900 Monster

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 900 Monster

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 900 Monster.

Mikuni part number: N213109
Ducati part number: 13440011A

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Ducati 900 Monster

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 900 Monster

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 900 Monster

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Ducati 900 Monster (1993 - 1998).

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Ducati 900 Monster

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Yamaha FZR1000 Exup

Complete Throttle Slide for Mikuni BDST 38 carburetors for Yamaha FZR1000 Exup

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Yamaha FZR1000 Exup.

Mikuni part number: N213109
Yamaha part number: 3GM-14940-00-00

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Yamaha FZR1000 Exup

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Yamaha FZR1000 Exup

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Yamaha FZR1000 Exup

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Yamaha FZR1000 Exup.

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Yamaha FZR1000 Exup

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Yamaha TDM850

Complete Throttle Slide for Mikuni BDST 38 carburetors for Yamaha TDM 850

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Yamaha TDM850 up to 1998.

Mikuni part number: N213109
Yamaha part number: 3GM-14940-00-00

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Yamaha TDM850

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Yamaha TDM 850

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Yamaha TDM 850

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Yamaha TDM850.

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Yamaha TDM 850

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Yamaha TRX 850

Complete Throttle Slide for Mikuni BDST 38 carburetors for Yamaha TRX 850

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Yamaha TRX850.

Mikuni part number: N213109
Yamaha part number: 3GM-14940-00-00

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Yamaha TRX 850

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Yamaha TRX 850

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Yamaha TRX 850

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Yamaha TRX850.

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Yamaha TRX 850

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Yamaha XTZ 750

Complete Throttle Slide for Mikuni BDST 38 carburetors for Yamaha XTZ 750

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Yamaha XTZ750.

Mikuni part number: N213109
Yamaha part number: 3GM-14940-00-00

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Yamaha XTZ 750

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Yamaha XTZ 750

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Yamaha XTZ 750

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Yamaha XTZ750.

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Yamaha XTZ 750

KSN213109
Complete Throttle Slide for Mikuni BDST 38 carburetors for Yamaha YZF 750 R

Complete Throttle Slide for Mikuni BDST 38 carburetors for Yamaha YZF 750 R

This is a complete, original, throttle slide for the Mikuni BDST 38 carburetors as used on, amongst others, the Yamaha YZF750R.

Mikuni part number: N213109
Yamaha part number: 3GM-14940-00-00

Please note that this is the complete slide.
We can also supply the diaphragm-only which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that this slide will fit your bike.

Complete Throttle Slide for Mikuni BDST 38 carburetors for Yamaha YZF 750 R

KSN213008
Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Yamaha YZF750R

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Yamaha YZF750R

Original throttle slide diaphragm for the Mikuni BDST 38 carburetors as used on, amongst others, the Yamaha YZF 750R.

Mikuni part number: N213008

Please note that this is the diaphragm only.
We can also supply the complete slide which can be found HERE.

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the diaphragm shown will fit your bike.

Throttle Slide Diaphragm for Mikuni BDST 38 carburetors for Yamaha YZF750R

BI13420201A
Float Assembly for Mikuni BDST carburetors for Ducati 400 SS SuperSport

Float Assembly for Mikuni BDST carburetors for Ducati 400 SS SuperSport

Original Float Assembly for Mikuni BDST carburetors as used on, amongst others, the Ducati 400 SS SuperSport.

Comes complete with needle valve needle.

Ducati number: 13420201A

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Float Assembly for Mikuni BDST carburetors for Ducati 400 SS SuperSport

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Ducati 400 SS SuperSport

Needle Valve for Mikuni BDST carburetors for Ducati 400 SS SuperSport

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Ducati 400 SS SuperSport.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Ducati 400 SS SuperSport

BI13420201A
Float Assembly for Mikuni BDST carburetors for Ducati 400 Monster

Float Assembly for Mikuni BDST carburetors for Ducati 400 Monster

Original Float Assembly for Mikuni BDST carburetors as used on, amongst others, the Ducati 400 Monster.

Comes complete with needle valve needle.

Ducati number: 13420201A

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Float Assembly for Mikuni BDST carburetors for Ducati 400 Monster

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Ducati 400 Monster

Needle Valve for Mikuni BDST carburetors for Ducati 400 Monster

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Ducati 400 Monster.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Ducati 400 Monster

BI13420201A
Float Assembly for Mikuni BDST carburetors for Ducati 600 Monster

Float Assembly for Mikuni BDST carburetors for Ducati 600 Monster

Original Float Assembly for Mikuni BDST carburetors as used on, amongst others, the Ducati 600 Monster.

Comes complete with needle valve needle.

Ducati number: 13420201A

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Float Assembly for Mikuni BDST carburetors for Ducati 600 Monster

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Ducati 600 Monster

Needle Valve for Mikuni BDST carburetors for Ducati 600 Monster

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Ducati 600 Monster.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Ducati 600 Monster

BI13420201A
Float Assembly for Mikuni BDST carburetors for Ducati 600 SS SuperSport

Float Assembly for Mikuni BDST carburetors for Ducati 600 SS SuperSport

Original Float Assembly for Mikuni BDST carburetors as used on, amongst others, the Ducati 600 SS SuperSport.

Comes complete with needle valve needle.

Ducati number: 13420201A

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Float Assembly for Mikuni BDST carburetors for Ducati 600 SS SuperSport

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Ducati 600 SS SuperSport

Needle Valve for Mikuni BDST carburetors for Ducati 600 SS SuperSport

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Ducati 600 SS SuperSport.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Ducati 600 SS SuperSport

BI13420201A
Float Assembly for Mikuni BDST carburetors for Ducati 750 Monster

Float Assembly for Mikuni BDST carburetors for Ducati 750 Monster

Original Float Assembly for Mikuni BDST carburetors as used on, amongst others, the Ducati 750 Monster.

Comes complete with needle valve needle.

Ducati number: 13420201A

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Float Assembly for Mikuni BDST carburetors for Ducati 750 Monster

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Ducati 750 Monster

Needle Valve for Mikuni BDST carburetors for Ducati 750 Monster

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Ducati 750 Monster.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Ducati 750 Monster

BI13420201A
Float Assembly for Mikuni BDST carburetors for Ducati 750 SS SuperSport

Float Assembly for Mikuni BDST carburetors for Ducati 750 SS SuperSport

Original Float Assembly for Mikuni BDST carburetors as used on, amongst others, the Ducati 750 SS SuperSport.

Comes complete with needle valve needle.

Ducati number: 13420201A

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Float Assembly for Mikuni BDST carburetors for Ducati 750 SS SuperSport

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Ducati 750 SS SuperSport

Needle Valve for Mikuni BDST carburetors for Ducati 750 SS SuperSport

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Ducati 750 SS SuperSport.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Ducati 750 SS SuperSport

BI13420201A
Float Assembly for Mikuni BDST carburetors for Ducati 900 Monster

Float Assembly for Mikuni BDST carburetors for Ducati 900 Monster

Original Float Assembly for Mikuni BDST carburetors as used on, amongst others, the Ducati 900 Monster.

Comes complete with needle valve needle.

Ducati number: 13420201A

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Float Assembly for Mikuni BDST carburetors for Ducati 900 Monster

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Ducati 900 Monster

Needle Valve for Mikuni BDST carburetors for Ducati 900 Monster

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Ducati 900 Monster.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Ducati 900 Monster

BI13420201A
Float Assembly for Mikuni BDST carburetors for Ducati 900 SS SuperSport

Float Assembly for Mikuni BDST carburetors for Ducati 900 SS SuperSport

Original Float Assembly for Mikuni BDST carburetors as used on, amongst others, the Ducati 900 SS SuperSport.

Comes complete with needle valve needle.

Ducati number: 13420201A

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Float Assembly for Mikuni BDST carburetors for Ducati 900 SS SuperSport

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Ducati 900 SS SuperSport

Needle Valve for Mikuni BDST carburetors for Ducati 900 SS SuperSport

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Ducati 900 SS SuperSport.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Ducati 900 SS SuperSport

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Suzuki GSF400 Bandit

Needle Valve for Mikuni BDST carburetors for Suzuki GSF400 Bandit

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Suzuki GSF400 Bandit.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Suzuki GSF400 Bandit

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Yamaha FZR1000 Exup

Needle Valve for Mikuni BDST carburetors for Yamaha FZR1000 Exup

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Yamaha FZR1000 Exup.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting standards.

Needle Valve for Mikuni BDST carburetors for Yamaha FZR1000 Exup

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Yamaha TDM850

Needle Valve for Mikuni BDST carburetors for Yamaha TDM850

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Yamaha TDM 850.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Yamaha TDM850

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Yamaha TRX850

Needle Valve for Mikuni BDST carburetors for Yamaha TRX850

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Yamaha TRX 850.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Yamaha TRX850

KSKVN16Q2T
Needle Valve for Mikuni BDST carburetors for Yamaha XTZ750

Needle Valve for Mikuni BDST carburetors for Yamaha XTZ750

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Yamaha XTZ 750.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Yamaha XTZ750

flexoid5xa4
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15 MM
  • 0.25 MM
  • 0.4 MM
  • 0.8 MM
  • 1.6 MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

JDK01
54-Piece Jet Drill Set

54-Piece Jet Drill Set

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

jet sizer
Carburettor Jet Gauges

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

JSG01
Jet size gauge 0.5 to 1.5 mm

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

Jet size gauge 0.5 to 1.5 mm

JET REAMER
16-Piece Jet Reamer Set

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Kit includes:

  • See-Through Spark Plug
  • Hexagonal adapter for spark plug wrench
  • Copper sealing washer
  • Extension Cord
  • Extension tube with mirror
  • Cleaning brush
  • Instructions in English

Colortune will fit most vehicles.

Extra adapter sizes available separately

Available in the following basic thread sizes:

  • 10 mm
  • 12 mm
  • 14 mm

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Article Number: G4074

Gunson Colortune See Through Spark Plug Kit

G4053
Gunson Carbalancer Carburetor Synchronizing Tool - G4053

Gunson Carbalancer Carburetor Synchronizing Tool - G4053

Gunson Car Balancer.

Internal combustion engines use a mixture of air and petrol to generate their power.

The performance therefore is influenced by the air flowing into it and the petrol that is metered out by the carburettor.

Unless the air flow in Twin or Multiple carburettors is correctly set, the correct mixture adjustment is unlikely to be achieved and this is the simplest tool to achieve that.

Suitable for use on SU, Solex, Auto-Lite (Fomoco), Stromberg, Weber and Zenith and can be adjusted to fit most carburettors including sidedraft, downdraft with air intakes (Venturi) from 25 mm to 67 mm (1”-2”) diameter

  • Easy read scale indicates the air flow and allows adjustment to optimum efficiency
  • Provides smoother and better acceleration
  • Carbalancer can be adjusted to fit most carburettors
  • Easy to follow instructions

The user manual for the Gunson Carbalancer, in English, can be downloaded HERE.

Available from our stock, ready to be shipped.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Article Number: G4053

Gunson Carbalancer Carburetor Synchronizing Tool - G4053

LOCTITE542-10ML
10 ml Loctite 542 Thread Sealant

10 ml Loctite 542 Thread Sealant

LOCTITE 542

Thread Sealant - medium strength.
For fine threads in hydraulic, pneumatic and general fittings.
Fast curing.

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.
The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Your Benefits:

  • Ideal for fine threads as used in hydraulic, pneumatic & general fittings
  • Suitable for metal threads only
  • Instant low-pressure seal
  • Resistant to fuel, oil, coolants and hydraulic fluids
  • Locks connection against vibration loosening
  • DVGW approval (EN 751-1): NG-5146AR0855

Excellently suited for sealing connections on carburetors and fuel pumps!

10 ml Loctite 542 Thread Sealant

LOCTITE243-5ML
5 ml Loctite 243 Thread Locker

5 ml Loctite 243 Thread Locker

LOCTITE 243

Threadlocking Adhesive - medium strength.

General purpose.

Suitable for all metal threaded assemblies.

LOCTITE 243 is a general purpose threadlocker of medium bond strength.
This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.
The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.
It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Your Benefits 

  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
  • Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
  • Permits disassembly with hand tools for servicing P1 NSF Reg. No.: 123000

5 ml Loctite 243 Thread Locker

G4125
Gunson Digital Exhaust Gas and CO Tester - G4125

Gunson Digital Exhaust Gas and CO Tester - G4125

The Gunson Digital Exhaust Gas and CO Tester is the perfect (and affordable !) tool for the DIY mechanic to measure and adjust the CO-percentage in the exhaust gases of cars, motorcycles, boats etc equipped with a petrol-driven internal combustion engines.

Allows you to measure the current CO-percentage after which you can adjust it to the required level.

This system is equipped with a pulse pump and is suitable for both leaded and unleaded petrol / gasoline.

The tester will calibrate itself in the open air, has no moving parts to reduce wear and tear and has no filters.

Measures the CO % to 0,5 % accurately throughout the range.

Power: 12 Volt car- or motorcycle battery.

The set comprises the following:

  • The Gastester with box
  • Puls pump with water trap
  • Metal exhaust probe
  • 3 Flexibel pipes
  • Operating Manual in English

If you require the owner's manual again, you can download it HERE.

Article Number: G4125

Additional instructions on adjusting the Gastester, in English, can be downloaded HERE.

This is a short instruction video, again in English:

Available from our stock, ready to be shipped.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Article Number: G4125

Gunson Digital Exhaust Gas and CO Tester - G4125