Carter Electrical Fuel Pumps.
On this page you will find our offerings on the electrical fuel pumps by Carter.
Carter Electrical Fuel Pumps
This is a special fuel pump for vehicles with a 6 Volt electrical system.
What makes this pump extra special is the fact that it is a Dual-Polarity pump. In other words: it is both suitable for vehicles with a Negative Earth as well as vehicles with a Positive Earth.
Despite being a 6 Volt pump, the output is an incredible 72 Gallons per Hour or 270 Liters!
Thanks to its low output pressure of 5.75 PSI / 0.4 Bar, it usually does not require a pressure regulator but please check your system requirements to make sure.
In case you still need to reduce the pressure, our Pressure Regulators can be found HERE.
The kit includes:
Couplings Specifications:Connection to pump body: 1/4" NPT tapered threadFuel Unions for fuel lines with 10 mm internal diameter
Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 542 Thread Sealant which will offer the added properties of protecting your connections from undoing themselves.
We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.
Carter 6 Volt Low-Pressure Fuel Pump - Dual Polarity
Webcon electric fuel pump cut-off safety switch.
This inertia switch detects the rapid change in velocity of a vehicle when impacted in any direction and is designed to be wired into the supply of the fuel pump to cut the power to the pump in the event of an accident.
The switch is normally immune to normal road vibration and road irregularities.
Suitable for under-bonnet fitment providing the switch is free from the risk of spillage of liquids or direct water spray.
The installation manual (in English) can be downloaded HERE.
Please note that this is the inertia switch ONLY. In order to wire this switch into you vehicle, you need a connector set which can be purchased separately or ordered right along with the switch by selecting it through the drop box at the top of this description.
Inertia Fuel Cut-Off Switch
Connector set for our Webcon Inertia Fuel Cut-Off Switch.
This set is required when you wire our Inertia Switch into your vehicle for the first time.
The installation manual (in English) for the Inertia Switch can be downloaded HERE.
Connector Set for Inertia Fuel Cut-Off Switch
Thread Sealant - medium strength.For fine threads in hydraulic, pneumatic and general fittings.Fast curing.
LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.
Excellently suited for sealing connections on carburetors and fuel pumps!
10 ml Loctite 542 Thread Sealant
Threadlocking Adhesive - medium strength.
Suitable for all metal threaded assemblies.
LOCTITE 243 is a general purpose threadlocker of medium bond strength.This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.
5 ml Loctite 243 Thread Locker
Roll of superior quality PTFE tape, used to thoroughly seal the connection of screw-in couplings on the bodies of fuel pumps, pressure regulators, fuel filters and the likes.
12 millimeter wide
Roll of 12 meters (around 36 ft. !); probably enough to last you a life-time!
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added avantage of securing the connection.
Roll of Superior Quality PTFE Thread Sealing Tape
Dellorto, Weber and Solex Carburettors Spare Parts Jets Chokes Emulsion Tubes Service Kits