8 MM Fuel Lines
8 MM Fuel Lines

8 MM Fuel Lines

On this page you will find fuel lines, fuel unions and related materials with 8 mm diameter.

This means that the outlet has an external diameter of 8 millimeter, suitable for fuel line with an internal diameter of that same 8 millimeter.

The inlet diameter and thread varies. Please see the individual item description for details.

8 MM Fuel Lines

!
J606
Fuel Line Joiner 8 mm - 8 mm

Fuel Line Joiner 8 mm - 8 mm

Fuel Line Joiner 8 mm - 8 mm.

This is a coupling to connect two pieces of flexible fuel line.

This concerns fuel line with an internal diameter of 8 mm.

Overall length: 42 mm

Adds a mere 3 mm to the length of your fuel line.

Despite the barbed ends, we do advise you to use our premium quality jubilee clips to secure your fuel line onto this joiner.

For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

Alternatively, you can go HERE for our accessories for 8 mm fuel line.

Fuel Line Joiner 8 mm - 8 mm

30211BOC08
8 mm Pipe Union with 1/8 NPT thread

8 mm Pipe Union with 1/8 NPT thread

Straight 8 mm Pipe Union with 1/8th thread.

Union with 1/8" NPT tapered thread for fuel lines with an internal diameter of 8 mm.

Specification:
Inlet: 1/8" tapered NPT
Outlet: 8 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

8 mm Pipe Union with 1/8 NPT thread

FPA904/A
8 mm Pipe Union with 1/4 NPTF thread

8 mm Pipe Union with 1/4 NPTF thread

Brass straight 8 mm Pipe Union with 1/4th thread.

Union with 1/4" NPTF tapered thread for fuel lines with an internal diameter of 8 mm.

Specification:
Inlet: 1/4" tapered NPTF
Outlet: 8 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using our Premium Quality Stainless Steel Jubilee Clips.
For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

8 mm Pipe Union with 1/4 NPTF thread

FPA2
8 mm Pipe Union with 3/8 NPT thread

8 mm Pipe Union with 3/8 NPT thread

Brass straight 8 mm Pipe Union with 3/8th thread.

Union with 3/8" NPT thread for fuel lines with an internal diameter of 8 mm.

Specification:
Inlet: 3/8" NPT
Outlet: 8 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 542 Thread Sealant which will offer the added properties of protecting your connections from undoing themselves.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using our Premium Quality Stainless Steel Jubilee Clips.
For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

8 mm Pipe Union with 3/8 NPT thread

FPA9011
Sytec 8 mm Pipe Union 90 Degrees with 1/8 NPTF thread

Sytec 8 mm Pipe Union 90 Degrees with 1/8 NPTF thread

Sytec 8 mm Pipe Union 90 Degrees with 1/8th tapered thread.

Union with 1/8" NPTF tapered thread for fuel lines with an internal diameter of 8 mm.

Specification:
Inlet: 1/8" tapered NPTF
Outlet: 8 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 542 Thread Sealant which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec 8 mm Pipe Union 90 Degrees with 1/8 NPTF thread

FPA9021/A
Sytec 8 mm Pipe Union 90 Degrees with 1/4 NPTF thread

Sytec 8 mm Pipe Union 90 Degrees with 1/4 NPTF thread

Sytec 8 mm Pipe Union 90 Degrees with 1/4th thread for, amongst others, Facet Red Top Fuel Pumps.

Union with 1/4" NPTF tapered thread for fuel lines with an internal diameter of 8 mm.

Specification:
Inlet: 1/4" tapered NPTF
Outlet: 8 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec 8 mm Pipe Union 90 Degrees with 1/4 NPTF thread

T8
Sytec 8 mm Brass Fuel T-Piece

Sytec 8 mm Brass Fuel T-Piece

Sytec Brass Fuel T-Piece for fuel lines with an internal diameter of 8 millimeter.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using our stainless steel jubilee clips.

For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec 8 mm Brass Fuel T-Piece

99900.630
8 mm Fuel Return Line T-Piece

8 mm Fuel Return Line T-Piece

8 mm Fuel T piece for use where a fuel system requires a fuel return line and the carburettor does not have one fitted.

It contains a 0.7 mm brass restrictor in the leg leading to the fuel return line.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using our stainless steel jubilee clips.

For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

8 mm Fuel Return Line T-Piece

99901.415
6 + 8 mm Fuel Return Line T-Piece

6 + 8 mm Fuel Return Line T-Piece

Fuel T piece for use where a fuel system requires a fuel return line and the carburettor does not have one fitted.

This particular version has 2 x 8 mm connections and 1 x 6 mm.

It contains a 0.7 mm brass restrictor in the 6 mm leg leading to the fuel return line.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using our stainless steel jubilee clips.

For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

6 + 8 mm Fuel Return Line T-Piece

J604
Fuel Line Adapter 6 mm - 8 mm

Fuel Line Adapter 6 mm - 8 mm

Metal Fuel Line Adapter 6 mm - 8 mm.

This is coupling to connect two pieces of flexible fuel line.

This concerns one fuel line with an internal diameter of 6 mm and one with an internal diameter of 8 mm.

Overall length: 46 mm

Adds a mere 9 mm to the length of your fuel line.

Despite the barbed ends, we do advise you to use our premium quality jubilee clips to secure your fuel line onto this joiner.

For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

Alternatively, you can go HERE for our accessories for 6 mm fuel line or HERE for our accessories for 8 mm fuel line.

Fuel Line Adapter 6 mm - 8 mm

J806
Fuel Line Adapter 8 mm - 10 mm

Fuel Line Adapter 8 mm - 10 mm

Metal Fuel Line Adapter 8 mm - 10 mm.

This is coupling to connect two pieces of flexible fuel line.

This concerns one fuel line with an internal diameter of 8 mm and one with an internal diameter of 10 mm.

Overall length: 50 mm

Adds a mere 9 mm to the length of your fuel line.

Despite the barbed ends, we do advise you to use our premium quality jubilee clips to secure your fuel line onto this joiner.

For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

Alternatively, you can go HERE for our accessories for 10 mm fuel line or HERE for our accessories for 8 mm fuel line.

Fuel Line Adapter 8 mm - 10 mm

J1006
Fuel Line Adapter 8 mm - 12 mm

Fuel Line Adapter 8 mm - 12 mm

Metal Fuel Line Adapter 8 mm - 12 mm.

This is coupling to connect two pieces of flexible fuel line.

This concerns one fuel line with an internal diameter of 8 mm and one with an internal diameter of 12 mm.

Overall length: 53 mm

Adds a mere 9 mm to the length of your fuel line.

Despite the barbed ends, we do advise you to use our premium quality jubilee clips to secure your fuel line onto this adapter.

Fuel Line Adapter 8 mm - 12 mm

FUELPIPEPLUG8MM
Blue Anodized Sytec Fuel Line Plug for 8 mm

Blue Anodized Sytec Fuel Line Plug for 8 mm

Blue Anodized Sytec Fuel Line Plug for 8 mm.

Ideal for blanking unused fuel lines.

We do advise you to use our premium quality jubilee clips to secure your fuel line onto this plug.
For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

Alternatively, you can go HERE for our accessories for 8 mm fuel line.

Blue Anodized Sytec Fuel Line Plug for 8 mm

FUELGAUGEKIT
Sytec In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

Sytec In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

Sytec In-Line Fuel Pressure Gauge Kit.

A fantastically finished set to build your own in-line fuel pressure monitoring system.

Specifically for, low-pressure carburetor systems.
NOT suited for high-pressure fuel-injection systems!

The set consists of:

  • Sytec fuel pressure gauge (0 - 15 PSI / 0 - 1 Bar)
  • Pressure gauge adapter with connections for 8 mm fuel line
  • Brass blanking plug
  • Roll of our Superior Quality PTFE tape
  • 2 Stainless Steel jubilee clips for 8 mm fuel line

Suitable for flexible fuel lines with an internal diameter of 8 mm.

The adapter is machined from a solid billet of aluminum.

This set is intended to be used on low-pressure fuel systems for carburetors.
A high-pressure set for fuel injection systems can be found HERE.

Spare, brass, blanking plugs can be found HERE.

Sytec In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

WFP150KIT
Webcon In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

Webcon In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

Webcon In-Line Fuel Pressure Gauge Kit.

A fantastically finished set to build your own in-line fuel pressure monitoring system.

Specifically for, low-pressure carburetor systems.
NOT suited for high-pressure fuel-injection systems!

The set consists of:

Suitable for flexible fuel lines with an internal diameter of 8 mm.

The adapter is machined from a solid billet of aluminum.

This set is intended to be used on low-pressure fuel systems for carburetors.

A high-pressure set for fuel injection systems can be found HERE.

Spare, brass, blanking plugs can be found HERE.

We advise Loctite 543 Thread Sealant to secure the gauge in the adapter.

Webcon In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

WFP151KIT
Webcon In-Line Fuel Pressure Gauge Kit - 0 - 120 PSI / 0 - 8 Bar

Webcon In-Line Fuel Pressure Gauge Kit - 0 - 120 PSI / 0 - 8 Bar

Webcon In-Line Fuel Pressure Gauge Kit.

A fantastically finished set to build your own in-line fuel pressure monitoring system.

Specifically for, low-pressure carburetor systems.
NOT suited for high-pressure fuel-injection systems!

The set consists of:

Suitable for flexible fuel lines with an internal diameter of 8 mm.

The adapter is machined from a solid billet of aluminum.

This set is intended to be used on high-pressure injection systems.

A low-pressure set for carbureted systems can be found HERE.

Spare, brass, blanking plugs can be found HERE.

We advise Loctite 543 Thread Sealant to secure the gauge in the adapter.

Webcon In-Line Fuel Pressure Gauge Kit - 0 - 120 PSI / 0 - 8 Bar

FGA100
Fuel Pressure Gauge Adapter

Fuel Pressure Gauge Adapter

In line fuel gauge adapter for pressure gauges with a thread size of 1/8th NPTF.

Suitable for flexible fuel lines with an internal diameter of 8 mm.

Machined from a solid billet of aluminum.

This adapter is supplied with brass blanking plug.

Can be used with the Sytec Low Pressure Fuel Pressure Gauge, the Webcon High Pressure Fuel Pressure Gauge or any other gauge with 1/8" tapered NPTF thread.

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Spare, brass, blanking plugs can be found HERE.

Fuel Pressure Gauge Adapter

FPA906
1/8'' Screw-On Fuel Pump Filter

1/8'' Screw-On Fuel Pump Filter

This is a special screw-on fuel filter to be used with a variety of electric fuel pumps.

Failure to operate those pumps with a suitable filter like this usually voids the warranty on the pump!

This filter suits, amongst others, the Airtex 6Volt filter and the range of Solid State fuel filters by Facet.

Couplings Specifications:
Connection to pump body: 1/8" NPTF tapered thread
Fuel Union for fuel lines with 8 mm internal diameter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

1/8'' Screw-On Fuel Pump Filter

10536.035
(68) Single Fuel Union for Weber DCOE and DCO/SP carburetors

(68) Single Fuel Union for Weber DCOE and DCO/SP carburetors

Single 90 degrees fuel union for the Weber DCOE carburetors.

Connects to the regular 8 mm internal diameter fuel line.

Also fits the Weber DCO / SP.

Required quantity per set of carburetors: 1

This is item number 68 in the drawing.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

(68) Single Fuel Union for Weber DCOE and DCO/SP carburetors

10536.034
(93) T Fuel Union for Weber DCOE and DCO/SP carburetors

(93) T Fuel Union for Weber DCOE and DCO/SP carburetors

Double ("T") fuel union for the Weber DCOE carburetors.

Connects to the regular 8 mm internal diameter fuel line.

Also fits the Weber DCO / SP.

Required quantity per set of carburetors: 1

This is item number 93 in the drawing.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

(93) T Fuel Union for Weber DCOE and DCO/SP carburetors

CUA001
(100) Straight Fuel Union Set for Weber DCOE carburetors

(100) Straight Fuel Union Set for Weber DCOE carburetors

Straight Fuel Union Set for the Weber DCOE carburetors.

Connects to the regular fuel line with 8 mm internal diameter.

The set consists of a straight fuel union, banjo bolt and two copper washers.
Individually, these represent items 67, 68, 69 / 93 and 70 in the drawing.

Also fits the Weber DCO / SP.

Required quantity per carburettor: 1

This is item number 100 in the drawing.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

(100) Straight Fuel Union Set for Weber DCOE carburetors

CUA001
(53) Straight Fuel Union Set for Weber IDA 2C carburetors

(53) Straight Fuel Union Set for Weber IDA 2C carburetors

Straight Fuel Union Set for the twin-choke Weber IDA carburetors.

Connects to the regular fuel line with 8 mm internal diameter.

The set consists of a straight fuel union, banjo bolt and two copper washers.
Individually, these represent items 51, 52, 53 and 54 in the drawing.

Also fits the Weber DCOE and DCO / SP.

Required quantity per carburettor: 1

This is item number 53 in the drawing.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

(53) Straight Fuel Union Set for Weber IDA 2C carburetors

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

FUELINJECTIONFILTE
Sytec Fuel Filter for Injection Systems - 8 mm

Sytec Fuel Filter for Injection Systems - 8 mm

Special Sytec fuel filter for injected fuel systems.

Fuel Unions for fuel lines on both end with 8 mm internal diameter.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

This filter measures some 76 mm in length and 55 mm in diameter.

Sytec Fuel Filter for Injection Systems - 8 mm

2134.0600
Cohline E10-resistant fuel line hose with 8 mm inner diameter

Cohline E10-resistant fuel line hose with 8 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an actual inner diameter of 7.5 mm and 13.5 mm outer diameter and therewith a nice and tight fit for 8 mm fuel unions.

This fuel line is DIN 73379-2a compliant.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

This hose uses 11 - 13 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter

2190.0615
Cohline E15-resistant SUBMERSIBLE Fuel Line Hose with 8 mm inner diameter

Cohline E15-resistant SUBMERSIBLE Fuel Line Hose with 8 mm inner diameter

This is the top-of-the-line Cohline, E15-resistant, SUBMERSIBLE flexible fuel line / hose.

This fuel hose has an actual inner diameter of 7.3 mm and 14.5 mm outer diameter and therewith a nice and tight fit for 8 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

This is the version which is also E15 resistant on the OUTSIDE so that it can be used for "in-tank" applications as often used by Volkswagen on their early models.

Meets the VW TL 522 56 standard.

Temperature:

  • -40°C to + 70°C for Petrol

Safety Factor:

  • 3:3 (Burst pressure = 3.3 x working pressure)

Regular pressures:

  • Regular working pressure: 6 Bars / 87 PSI
  • Bursting pressure: 20 Bars / 290 PSI

Minimum bend radius in mm:

  • 70 mm

This hose uses 14 - 16 mm jubilee clips.

Cohline E15-resistant SUBMERSIBLE Fuel Line Hose with 8 mm inner diameter

2134.01.0600
Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 8 mm inner diameter and 16 mm outer diameter and is therewith suitable for 8 mm fuel unions.

This fuel line is DIN 73379 Type B compliant.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

 This fuel line uses 15 - 17 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

gatestextiel8mm
Gates textile covered fuel line hose with 8 mm inner diameter

Gates textile covered fuel line hose with 8 mm inner diameter

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 8 mm inner diameter and 13 mm outer diameter.

It is sold in lengths of 0.5 meter.

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on low-pressure (carburetor) fuel systems in passenger cars.
NOT suited for high pressure fuel injection systems.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 11 - 13 mm jubilee clips.

Gates textile covered fuel line hose with 8 mm inner diameter

norm5mm
Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide.

Again one of those items that allows you to put the finishing touches on a restoration!

This is the famous "endless band hose clamp with buckle" that was used throughout the 1950's, 1960's and 1970's in the car industry.

Unfortunately, these band clamps are only suitable for one-time use and are discarded after removing them.

Over the years, these clamps have become harder and harder to find but we managed to find a source!

We are selling these in sets.

Such a set consist of the following:

  • Approximately 100 cm Zinc-plated band, 5 millimeters wide
  • 3 buckles

This way, you have roughly a foot (or 33 cm) of band per clamp / buckle which is more than enough for regular applications.

Thanks to the generous length of band, there is virtually no limit to the diameter or circumference of the clamp that you wish to apply although these were usually applied to small diameter fuel lines.

Please note that this style of clamping is NOT suitable for steel-braided lines.

Endless Band Hose Clamp with Buckle - 5 mm wide

jubilee10-12
10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 6 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 6 mm internal diameter fuel line as well as our green "Italian Style" transparent fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 10 and 12 mm internal diameter (i.e. 10 - 12 mm external hose/line diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee11-13
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

PRO805
Sytec Pro-Line in-line fuel filter - 8 mm

Sytec Pro-Line in-line fuel filter - 8 mm

In line fuel filter with cleanable / replaceable filter.

Suitable for 8 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Sytec Pro-Line in-line fuel filter - 8 mm

FLEXIDRIVER
Flexi Driver tool to tighten Jubilee Clips

Flexi Driver tool to tighten Jubilee Clips

Special flexible tool to correctly tighten jubilee clips.

This Flexidriver is a highly effective, torque sensitive screwdriver, calibrated to bend when the proper torque is attained.

Apart from that, it's a handy tool with flexible shaft to tighten the clamps properly, also in hard-to-reach places.

Suitable for 7 mm connectors.

Flexi Driver tool to tighten Jubilee Clips

HUCOPUMPFP02
Huco Low-Pressure 12 Volt Fuel Pump Kit - Suction Type

Huco Low-Pressure 12 Volt Fuel Pump Kit - Suction Type

Huco Low-Pressure 12 Volt Fuel Pump Kit.

Hüco fuel pump for engines of up to some 160 BHP.

This is a "suction type" pump, intended to placed in the engine compartment of your vehicle.

Please see HUCOPUMPFP03 in case you require a "pressure type" pump to be placed near the fuel tank of your vehicle.

Pump specification:

  • Flow rate 27.5 Gallons/hour / 125 liters/hour
  • Pressure: 2.1 PSI / 0.15 Bar
  • 12 - 14 Volt - negative earth
  • Suitable for nearly all fuels, including modern ones, but NOT suited for Methanol or Bio-Diesel

Kit includes:

  • Pump
  • Mounting bracket

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Thanks to its operating pressure of 2.1 PSI (some 0.15 Bar), this Huco pump does not require a pressure regulator which makes it a very cost-efficient proposition.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

When using an electrical fuel pump, we also advise you to equip your vehicle with an Inertia Fuel Cut-Off Switch as a safety precaution.

Huco Low-Pressure 12 Volt Fuel Pump Kit - Suction Type

HUCOPUMPFP03
Huco Low-Pressure 12 Volt Fuel Pump Kit - Pressure Type

Huco Low-Pressure 12 Volt Fuel Pump Kit - Pressure Type

Huco Low-Pressure 12 Volt Fuel Pump Kit.

Hüco fuel pump for engines of up to some 160 BHP.

This is a "pressure type" pump, intended to placed near the fuel tank.

Please see HUCOPUMPFP02 in case that you require a "suction type" pump to be placed in the engine compartment of your vehicle.

Pump specification:

  • Flow rate 27.5 Gallons/hour / 125 liters/hour
  • Pressure: 2.1 PSI / 0.15 Bar
  • 12 - 14 Volt - negative earth
  • Suitable for nearly all fuels, including modern ones, but NOT suited for Methanol or Bio-Diesel

Kit includes:

  • Pump
  • Mounting bracket

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Thanks to its operating pressure of 2.1 PSI (some 0.15 Bar), this Huco pump does not require a pressure regulator which makes it a very cost-efficient proposition.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

When using an electrical fuel pump, we also advise you to equip your vehicle with an Inertia Fuel Cut-Off Switch as a safety precaution.

Huco Low-Pressure 12 Volt Fuel Pump Kit - Pressure Type

FPP01
Fuel Union for Huco Low-Pressure Fuel Pump

Fuel Union for Huco Low-Pressure Fuel Pump

Fuel Union for Huco Low-Pressure Fuel Pump.

Fits both varieties of the Hüco pump that we carry in our range.

Is supplied complete with O-Ring.

Suitable for fuel lines with 8 mm internal diameter.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

 

Fuel Union for Huco Low-Pressure Fuel Pump

pierburg721440510
Pierburg Low-Pressure 12 Volt Fuel Pump 7 21440 51 0

Pierburg Low-Pressure 12 Volt Fuel Pump 7 21440 51 0

Pierburg Low-Pressure 12 Volt Fuel Pump 7 21440 51 0.

This is the famous Pierburg low-pressure fuel pump which is widely used on carbureted vehicles.

It is not suitable for fuel injected vehicles.

It concerns a complete set, as depicted, including mounting material.

Pump specification:

  • 12 Volt, negative earth
  • Uses less than 2.0 Amp
  • Flow rate 95 liters / hour
  • Output pressure in Bar: 0.27 - 0.38 Bar
  • Output pressure in PSI: 4 - 5.5 PSI
  • Body diameter: 38 mm
  • Body length: 84.5 mm
  • Overall length: 133.5 mm
  • Fuel unions: 2 x 8 mm

Kit includes:

  • Pump
  • Mounting material

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

This pump replaces the following Pierburg pumps:

  • 7 20036 00 0
  • 7 20197 00 0
  • 7 20788 01 0
  • 7 20788 02 0
  • 7 20788 51 0
  • 7 20788 52 0
  • 7 21440 01 0

Thanks to its relatively low operating pressure, this pump generally does not require a pressure regulator which makes it a very cost-efficient proposition.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

When using an electrical fuel pump, we also advise you to equip your vehicle with an Inertia Fuel Cut-Off Switch as a safety precaution.

Pierburg Low-Pressure 12 Volt Fuel Pump 7 21440 51 0

67263TS
Roll of Superior Quality PTFE Thread Sealing Tape

Roll of Superior Quality PTFE Thread Sealing Tape

Roll of superior quality PTFE tape, used to thoroughly seal the connection of screw-in couplings on the bodies of fuel pumps, pressure regulators, fuel filters and the likes.

12 millimeter wide

Roll of 12 meters (around 36 ft. !); probably enough to last you a life-time!

As an alternative, you can use our Loctite 243 Thread Locker which will offer the added avantage of securing the connection.

 

 

Roll of Superior Quality PTFE Thread Sealing Tape

LOCTITE243-5ML
5 ml Loctite 243 Thread Locker

5 ml Loctite 243 Thread Locker

LOCTITE 243

Threadlocking Adhesive - medium strength.

General purpose.

Suitable for all metal threaded assemblies.

LOCTITE 243 is a general purpose threadlocker of medium bond strength.
This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.
The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.
It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Your Benefits 

  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
  • Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
  • Permits disassembly with hand tools for servicing P1 NSF Reg. No.: 123000

5 ml Loctite 243 Thread Locker

LOCTITE542-10ML
10 ml Loctite 542 Thread Sealant

10 ml Loctite 542 Thread Sealant

LOCTITE 542

Thread Sealant - medium strength.
For fine threads in hydraulic, pneumatic and general fittings.
Fast curing.

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.
The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Your Benefits:

  • Ideal for fine threads as used in hydraulic, pneumatic & general fittings
  • Suitable for metal threads only
  • Instant low-pressure seal
  • Resistant to fuel, oil, coolants and hydraulic fluids
  • Locks connection against vibration loosening
  • DVGW approval (EN 751-1): NG-5146AR0855

Excellently suited for sealing connections on carburetors and fuel pumps!

10 ml Loctite 542 Thread Sealant