(52) Pump Diaphragm for Solex 40 PII carburetor CCR2318

Solex
CCR2318
9504918694852
    Delivery time: In stock and ready to ship
Add to cart
  • Description
  • More

CCR2318
Replacement pump diaphragm for a Solex 40 PII carburetor.

CCR2318 Pump Diaphragm for Solex 40 PII carburetor

The dish on this diaphragm measures 30mm in diameter with the can being 9.7 mm tall, measured from that same dish.

CCR2318 Pump Diaphragm for Solex 40 PII carburetor

This product is priced and sold as a single unit.
Required quantity per carburetor: 1

CCR2318 Pump Diaphragm for Solex 40 PII carburetor

This is item number 52 on the drawing of the Solex 40 PII carburetor.

This is Our Article Number: CCR2318

Operating principles of the acceleration pump and the role of the diaphragm in this:

This diaphragm is activated by a lever that is connected to the throttle lever(s).

When releasing the throttle, a spring returns the diaphragm to its initial position and by doing so, it sucks-in fuel into the pump chamber, from the float chamber.
A one-way valve prevents this fuel from leaking back into the float chamber.

When you then activate throttle, that same lever pushes the diaphragm inwards and the pressure that is thus created makes the fuel being squirted downstream with the main airflow through the pump jet.

This extra flow of fuel will prevent "fuel starvation" from occurring when the throttle is suddenly opened which allows large quantities of air being sucked into the engine.

When you then release the throttle again, the diaphragm is again pushed back by the spring, thus priming the pump chamber with a fresh supply of fuel and making it ready to repeat the procedure.

This is an excellent system that has been employed for decades by various makes of carburetors and applied to all kinds of applications.
So, not only Solex but also Weber, Pierburg, Zenith and Mikuni used this system with more or less identical operating principles.

However, to ascertain a flawless operation of this system, the diaphragm need to be in excellent condition.

The original diaphragms are now coming of age and are suffering from the ravages of aggressive modern fuels which causes the "rubberized textile" material to harden or even crack, causing erratic running of the engine and fuel leaks.

Replacing the diaphragm is then the only sensible option which is a rather simple operation.

A complete overview of our pump diaphragms for Solex carburettors can be found HERE.

CCR2318 Pump Diaphragm for Solex 40 PII carburetor

CCR2318 Pump Diaphragm for Solex 40 PII carburetor

CCR2318
Replacement pump diaphragm for a Solex 40 PII carburetor.

The dish on this diaphragm measures 30mm in diameter with the can being 9.7 mm tall, measured from that same dish.

This product is priced and sold as a single unit.
Required quantity per carburetor: 1

This is item number 52 on the drawing of the Solex 40 PII carburettor.

This is Our Article Number: CCR2318

CCR2318 Pump Diaphragm for Solex 40 PII carburetor

CCR2318 Pump Diaphragm for Solex 40 PII carburetor

CCR2318 Pump Diaphragm for Solex 40 PII carburetor


CCR2318 Pump Diaphragm for Solex 40 PII carburetor

CCR2318 Pump Diaphragm for Solex 40 PII carburetor
!