476088 Facet GOLD-FLO 24 Volt Fuel Pump | Pump only
476088
Facet 24 Volt fuel pump.
Specifically designed for vehicles and applications with a 24 Volt electrical system.
Pump specification:
- Flow rate 32 Gallons/hour / 120 liters/hour
- Pressure: 4 - 5 PSI (0.28 - 0.35 Bar)
- Dry prime height 12 inches / 0.6 Mtrs
- Pipe union thread size: 1/8 NPTF tapered thread
- 24 Volt negative earth
- Suitable for nearly all fuels, including modern ones, but NOT suited for Methanol
Please note: this concerns ONLY the pump body... no further connectors or mounting material!
Couplings Specifications:
Connection to pump body: 1/8" NPTF tapered thread
It could be that your fuel system operates at a lower pressure than this pump delivers.
If this is the case, it requires a pressure regulator to prevent your carburetor(s) from flooding but please check your system requirements to make sure.
A variety of pressure regulators can be found HERE.
Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 542 Thread Sealant which will offer the added properties of protecting your connections from undoing themselves.
We strongly advise you to secure your fuel lines using our Stainless Steel Hose Clamps.
This is Facet Pump Number 476088 which is stamped onto one of the brackets:
The bracket on the other side shows the operating voltage and polarity, in this case Neg. for "Negative Earth" and 12V for 12 Volt.
