18930.086
This is a brand new Weber 38 DGMS carburetor.
It is an authentic Weber, Made in Spain.
This is a twin-choke 38mm carburetor.
This means that it has 2 throttle valves of 38 mm in diameter which are operated simultaneously.
These carburetors are often used on Ford's 3-liter V6 engines as used on the Capri, Granada and Scorpio models of between 1974 and 1982 but can of course be used on a variety of other engines.
Being a 38 DGMS it is equipped with a Manually operated choke (cold-start) mechanism which requires a "positive action" cable operation so the cable is used to pull the choke into action and to push it out of action.
This carburetor is also equipped with a fuel return line.
The bolt pattern of the base is 93 x 46 mm:
The chokes are, logically, 38mm each.
The height from the bottom of the base to the airfilter flange is some 85 mm while the total height is 111 mm.
Standard Jetting:
- Venturi: 27 mm
- Auxiliary venturi: 4.0
- 135 main jet
- F50 emulsion tube
- 185 air corrector jet
- 50 idle jet
- 55 Pump jet
- 2.50 Needle valve
There is a fair range of jets available for these carburetor so you can tune it to your requirements.
Please click HERE for those Weber DGAS jets.
This product is priced, and sold, individually thus as a single unit.
This is Weber Part Number: 18930086 / 18930.086